Injection Molding Machine Operating Controls — Part 1

Injection Molding Machine Operating Controls — Part 1

Practical Injection Molding covers the fundamentals of injection molding technology, including foundation basic training that all employees involved with the injection molding process must understand. This knowledge will allow them to make the best, most informed decisions on the production floor.

More information is available at:
http://www.paulsontraining.com/products/practical-injection-molding-basics/

This course is recommended for Injection Molding Machine Operators, Material Handlers, Set-up Personnel, Injection Molding Technicians and Production Supervisors.

The complete list of lessons in this injection molding training program is shown below.

Module 1 – Basic Injection Molding Operations
——————————————————————-
Lesson 1: Inside the Molding Machine
Lesson 2: Inside the Mold
Lesson 3: The Nature of Plastics
Lesson 4: Machine Operating Controls — Part 1
Lesson 5: Machine Operating Controls — Part 2

Module 2 — SkillBuilder Lab Lessons for Injection Molding Basic Module
—————————————————————————————————-
Lesson 1: Understanding the Injection Molding Process
Lesson 2: Setting Machine Controls
Lesson 3: Understanding Fill Rate Controls
Lesson 4: The Effects of Back Pressure
Lesson 5: Setting the Injection Limit Timer
Lesson 6: The Maximum Injection Pressure Settings
Lesson 7: Setting the Holding Timer
Lesson 8: Setting the Holding Pressure
Lesson 9: Mold Closed Time and Mold Open Time vs Melt Temperature
Lesson 10: The Effects of Barrel Zone Temperatures on the Melt Temperature
Lesson 11: Some Effects of the Mold Temperature
Lesson 12: The Effects of Screw RPM
Lesson 13: The Effect of the Screw Back Position
Lesson 14: Effects of Clamp Force
Lesson 15: Achieving and Controlling the Melt Temperature
Injection Molding Machine Operating Controls — Part 1



Injection Molding Machine Operating Controls — Part 1